Sailrite 111 in Power Stand with Clutch Motor is a straight stitch commercial sewing machine complete in a table stand with a 1/2 hp clutch motor. This full size straight stitch industrial sewing machine features a walking foot and needle feed (the needle penetrates the fabric and then moves back with the material). Sews up to 1,000 stitches per minute with the small diameter motor pulley which is installed by Sailrite (The Sailrite 111 is rated to sew up to a maximum of 3000 spm - this can be done by changing the motor pulley to a larger size). The smaller pulley is a benefit as it slows the machine down while at the same time greatly increasing slow speed penetration power. The Sailrite 111 has reversing capability and auto lubrication with oil pump and pan under head. A large rotary hook reduces frequency of bobbin winding and large underarm space (10.25" x 5") eases production.
The quality of the castings and machined parts is excellent. This is a machine that can be depended upon to give excellent service for years. And the compound walking foot mechanism assures absolute control of the fabric. Great for sewing medium to heavy weight leather, canvas, upholstery, vinyl.
Sailrite 111 in Power Stand with Clutch Motor Includes:
50 Assorted 135 x 17 needles
1 oz V-92 thread
5 large capacity "M style" bobbins
Industrial thread stand
Industrial bobbin winder
Oil and oil pan
3 screw drivers
Seam ripper
Maintenance brush
Hinges
Power Twist V-Belt
Knee lift
Drawer
Industrial table top
K-legs
Rubber feet for K-leg
Support pin
Clutch motor (with special pulley for slower speed control)
Treadle linkage bar
Foot treadle
Industrial light
Exclusive Sailrite 111 Sewing Machine DVD (2 hours 18 min)
Sailrite 111 Sewing Machine Specifications:
Shuttle: full rotary, gear driven
Weight: 79 lbs (head only) and 208 lbs for entire package
Maximum sewing speed per min: 3000 stitches (1000 with included specially installed motor pulley)
Maximum straight stitch length: 8 mm
Needle System: 135 x 17
Bed size: 18.75" x 7"
Underarm space: 10.25" x 5"
Built-in knee lift
Presser foot lift: hand lever 6.5 mm / knee controlled 13mm
K Leg Table Stand: This is the traditional way a commercial sewing machine is used. It provides a very solid sewing platform on which to work. The table surface is 20" deep by 48" wide. Leg height is adjustable from 28 to 34 inches. The cutout for the machine head is 7 1/8" by 18 7/8".
Sailrite 111 DVD:This DVD makes sewing machine setup and use easy. Every aspect of assembly and machine adjustment (including timing) is fully described and shown in high quality video. All motor and table stand configurations are included.
Sailrite 111 Warranty: All parts (excluding light bulbs, needles, feed dogs, throat plates, bobbins, and belts) and labor for repairs are fully guaranteed for two years by Sailrite. We encourage you to maintain and repair your own machine. If it must be returned for repair, you will be responsible for delivery both ways. The following issues are not covered under this warranty: damage due to improper use or neglect, impact damage, and normal wear from use of the sewing machine.
Sailrite 111 Sewing Machines can be returned within 30 days for a full refund less delivery.
